Non-destructive inspection surface crack detection: Casting and forging workpieces are prone to cracks on the processed surface. High-intensity ultraviolet flashlights can be used to check cracks.

Degreasing and cleaning inspection: Use a UV flashlight to excite the fluorescent characteristics of the grease, and detect the grease/stain on the workpiece.

Fluid system leakage detection: leakage of engine oil system, air conditioning refrigerant, water pipeline, etc.

Protection effect inspection: UV protection effect inspection of anti-ultraviolet glasses, clothing, anti-ultraviolet film, etc.

Biopolymerization experiment: In the biochemical laboratory, ultraviolet light is used to promote the polymerization of two different substances to form a polymer compound.

Three-proof glue coating effect inspection: three-proof glue is also known as: oil/UV glue/waterproof glue/shadow glue, the quality of the three-proof glue coating of electronic circuit boards directly affects the quality and life of the circuit board; with science The advancement of technology has become more and more demanding; especially when the circuit board is in a high-temperature and high-humidity environment, if a tiny contact of the electronic circuit board is not handled properly, it will directly cause the circuit board to corrode, short circuit or power outage. Cause failures, thereby affecting personnel safety and product life.

Surface inspection: Check LCD filters, semiconductor wafers, polarizers, glass or metal surfaces (dust, fingerprints, scratches).

Float glass tin surface detection: When float glass is formed, a certain amount of tin adheres to the lower surface of the glass, and this surface is called the tin surface. This tin surface has many particularities, which will have a direct impact and deviation on the further processing of the glass. The screen printing should be on the non-tin surface (the front of the glass), otherwise it will cast color. The plating layer is also on the non-tin surface, and the tin surface should also be convex when the tempering is slightly curved, otherwise a rainbow will appear. Hot melt glass, if the glass is reversed, it will affect the transparency.

UV curing industry: generally refers to coatings (paints) or glues that need to be cured with ultraviolet rays.

Criminal investigation: fingerprint inspection, accident analysis

Anti-counterfeiting identification: used to identify the authenticity of coins.

Gem/ore/diamond identification: UV radiation is mainly used to verify whether jewelry, gems and diamonds have fluorescence and phosphorescence

Sterilization/disinfection UV lamp: It is mainly suitable for air disinfection and disinfection of items in hospitals, and also suitable for kindergartens, catering service industries, food manufacturing industries or processing units.

Sensor sensitivity test: Our short-wave purple flashlight can also be used to detect the sensitivity of the flame sensor. It uses our purple flashlight to simulate the intensity of ultraviolet light emitted by the flame to detect the sensitivity of the sensor and the working status of the alarm device.